1 While turning on the printer, hold down SELECT and CANCEL JOB until all of the lights on the control panel are lit.
2 Press the right side of the MENU key, then press SELECT. The message SERVICE MODE temporarily appears and will reappear when the printer completes the initialization process.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
5. To exit the service mode, press GO.
Note: If READY appears in the control panel, the keys might have been released too soon, or the wrong keys were pressed.
Wednesday, October 27, 2010
HP Laserjet 4100 series service mode
Artikel Terkait HP Laserjet 4100 series service mode :
How to Resetting the maintenance count LaserJet 9040/9050 Series Printer1. Turn the printer off.2. Turn the printer back on and wait for the memory count, when the printer starts counting memory press ... - HP Laserjet Error Codes13.XX PAPER JAM [LOCATION]Media is jammed at the specified location (and possibly at other locations). If the message persists af ...
HP Printer ManualThis HP Printer Service manual is for HP LaserJet 8000. You can use this HP Printer Manual to assist troubleshooting the printer ... - HP Laserjet 4000 and 4050 series service mode1 Hold down [Select] and [Cancel Job] while turning on the printer until all of the lights on the Control Panel are lit. (If the ...
- HP Laserjet 4V and 4MV service mode1. Hold down the [On Line], [Form Feed], and [Enter] keys while powering ON the printer, until all lights are illuminated and the ...
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment