1 Hold down [Items] and [+] while powering ON the printer, until all lights are illuminated and the Display is blank. (If the Display Panel reads INTERNAL TEST at this point, the keys were released too soon. Repeat this step until successful.)
2 Press [Select]. The message SERVICE MODE is displayed briefly, then the printer automatically begins an INTERNAL TEST. After several seconds, both Control Panel Indicators turn OFF. (The printer may display WARMING UP if it has not warmed up completely.) After the printer has warmed up and passed the self test, SERVICE MODE is displayed.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press [On Line].
Sunday, October 24, 2010
HP Laserjet 5si service mode
Artikel Terkait HP Laserjet 5si service mode :
User Manual HP PSC 1310 All-IN-ONEThis manual HP PSC 1310 All-IN-ONE draw all entropy for your HP PSC 1310. It ready to ply you to soul a acquirement near underly ... 
HP Laserjet 4 and 4 plus series service mode1. Hold down the [On Line], [Form Feed], and [Enter] keys while powering ON the printer, until the ON LINE and FORM FEED indicato ... - HP 2100 Cold reset ManualTo fulfill a wintry adjust, turn the printer cognition off, then weightlifting and touch the JOB Score button. Metamorphose the p ...
- HP 2200 NVRAM ResetNVRAM Reset:1. Turn the printer power off.2. Press and hold GO.3. Turn the printer power back on and continue to hold GO until th ...
- Ink Level Reset for HP Cartidges HP21 and HP22|cyber-bee.blogspot.comInk Level Reset for HP Cartidges HP21 and HP22. Cartridges HP21 and HP22 can be found on the following printer, Hp deskjet 3920, ...
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment