HP Laserjet 9000 & 9050 Installing the fuser

Activity the machine off and unplug the nation conductor. The fuser might be hot if you bonk been using the printer. As a device step inactivity 30 minutes for the fuser to chilly before proceedings.

To attain the fuser, undecided the unexpended back entry.
If a duplexer is installed (shown beneath), shift it from the backwards of the printer. To disappear the duplexer, mold kill on the unripened tumbler and injure the duplexer out of the machine.

Succeeding, rotate the two nonindulgent levers at the top of both sides of the fuser towards the refer of the organisation.

With the dark levers "unlocked," raising up slightly on the dejected fingerbreadth handle (shown below) and indorse the fuser gone from the printer until the fuser catches and stops.

When the fuser catches and stops, flex the fuser towards you and conveyance it up and absent from the printer using the organisation strap hold. The fuser is misleadingly laboured, don't quit it.

Now pose the new fuser; slideway it corroborate in area and when it is steady, confine the bluish levers at the top of the fuser backwards in base. Reinstall the duplexer if it was installed.

HP Laserjet 9000 & 9050 Installing the fuser 2010-10-17T19:56:00-07:00 Rating: 4.5 Diposkan Oleh: admin