Canon pixma MX700 links Flashed

1) Disconnect the printer's power outlet
2) Press and hold the power button while connecting the power outlet back.
3) While still holding down the power button, press the reset button twice.(red circle with a triangle)
4) Release the power button
The printer takes about 10 seconds to show the number 1 (factory mode)
5) Open the printer cover cover (not the scanner cover) and just loosen the cartridges. With the printer still open, disconnect the power outlet.
6) Close the lid and turn on the printer.
7) You will no longer get the ink low warning.If you check the ink status
it will show that the cartridge is full !!! THe ink level has been reset successfully.

Canon pixma MX700 links Flashed 2010-12-12T20:01:00-08:00 Rating: 4.5 Diposkan Oleh: admin