# Cover only the top row of contact pads that you see with tape.
# Put the cartridge in the printer, and it will give you a message "Cartridge Not Inserted".
# Remove the cartridge from the printer.
# Now cover only the top two rows of contact pads with tape.
# Put the cartridge in the printer, and it will again give you a message "Cartridge Not Inserted".
# Remove the cartridge from the printer again.
# Carefully, remove the tape that you had covering the top two rows of contact pads on the electronic strip.
# Place the cartridge back into the machine. The machine should now show that cartridge with a full status.
Tuesday, February 15, 2011
Ink Level Reset Instructions for Canon PG-40, PG-50, CL-41 and CL-51 cartridges
Artikel Terkait Ink Level Reset Instructions for Canon PG-40, PG-50, CL-41 and CL-51 cartridges :
Canon mp150 reset codesMP150/MP160 ERROR CODEE9 The connected digital camera / video camera does not support CameraDirect PrintingE14 The Ink cartridges ... - MP390 Waste ink tank fullthis is the sequence that worked, and do not worry about the pad, it is a sponge that you can take it out gently yourself, wash i ...
- Reset Canon Pixma ip1880This is How to Reset Canon Pixma iP 1880 :
Waste Ink Counter Reset Manual for Service mode
1. Turn On iP1880
2. Push and Hold Res ...
- Reset ink level on Canon Pixma iP1800Resetting the PrinterBy resetting the printer's power, the print buffer is cleared and certain sensors are reset. If there is inv ...
- How to clear E27 Code* With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset ...
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment